3.2.5  

CMD parameters for CTI firewall 
 
Every TAPI 120 client that is connected to the CMD and permitted to seize a line, must be entered in the CTI Firewall tab to enable this access.
 >   Activate the CTI Firewall tab in the CMD configuration dialog.
    You will see a list of the TAPI 120 clients (IP addresses) already configured for access:
ShowMore Display 
    Entries are displayed with the following information:
   
Column  
Description  
Name  
Freely chosen name for the TAPI 120 client, enabling a single entry in the firewall to be identified.  
Call number  
Call number of the extension to be monitored  
TAPI 120 IP addresses  
IP address of the TAPI 120 client  
ShowMore Sorting the list displayed 
ShowMore Saving parameters 

3.2.5.1  

Editing/deleting an entry 

Editing an entry  
 >   To edit the parameters of an entered TAPI 120 client, double-click the corresponding value. The value can then be changed in the entry field displayed.

Deleting an entry  
 >   Highlight the entry to be deleted using the mouse and click Delete or press the key. The entry is then deleted from the list.

3.2.5.2  

Adding a TAPI 120 client 
 1.   Click Add in the CTI Firewall tab.
 2.   Enter the data of the TAPI 120 client in the input dialog and confirm with OK. You return to the CTI Firewall tab.
An unlimited number of clients can be entered on this tab. However, please note that the number of clients permitted to seize lines at any one time is limited by the licensing agreement (see also CMD license parameters).