3.2.4 |
CMD assignment parameters |
The advanced CMD parameters are determining settings relevant for to the connection between the connected system and the CMD. System-dependent parameters are defined on the system and should be specified here accordingly. |
> | Activate the Assignment tab in the CMD configuration dialog. |
![]() |
A list of assigned CMDs/systems is displayed under the following entry: |
![]() |
![]() |
3.2.4.1 |
Adding nodes |
1. | Click Add in the Assignment tab. |
![]() |
Enter the following parameters: |
|
2. | Click Apply to save entries. You can then enter additional parameters for other systems. Click OK to save changes and exit the entry dialog. The CMD configuration dialog re-appears. |
A maximum of 64 systems/nodes can be configured. |
3.2.4.2 |
Editing / deleting an entry |
Editing an entry |
> | To edit the parameters of a configured system double-click the corresponding value. The value can then be changed in the entry field displayed. |
Deleting an entry |
> | Highlight the entry to be deleted using the mouse and click Delete or press the ![]() |
3.2.4.3 |
Exporting / importing parameters (nodes) |
Exporting |
1. | The configured node information can be exported to a file, e.g. to save a specific level. Click Nodes Export to start exporting. |
2. | Enter the name of the export file in the dialog displayed and confirm. |
The entries are exported. The CMD configuration dialog re-appears. |
Importing |
1. | Node parameters can also be imported from a file, e.g. containing exported parameter information. Click Nodes Import to start importing. |
2. | Select the file to be imported. |
The entries are imported and the CMD configuration dialog re-appears. |
HiPath TAPI 120 V2.0, Installation and Configuration, Administrator Documentation, Issue 10 | up ![]() |
|
![]() |
||
Disclaimer & Copyright | ID: P31003H3540T1200176A9 | 2015-10-26 |